Coach Bus cooling system parts JP200 Automobile Water Pump 24V 180W Fuel Cell Pack Cooling Water Pump
Technical Parameters :
| No. | Parameters |
| Model | JP200-2Pin-24V |
| Rated Voltage: | 24V |
| Working range: | DC18~32V |
| Rated Current: | 7.5A |
| Flow Rate: | 6000L/H |
| Head: | 5.5m |
| Power: | 180±10W |
| Protection Level: | IP68 |
| Working temperature: | -40~85℃ |
| Medium: | Antifreeze |
| Working Life: | More than 20000h |
| Weight: | 1.8KG |
Mechanical installation
1. The pump can be installed vertically or horizontally mounted (see figure 1 ) When installed
vertically, the outlet port should be upward .
2. In order to avoid the dry- running (air get stuck in impeller),the water pump outlet port should
be vertical or in the upper of the impeller. (see figure 1 )
3.. The connected pipe should be vertically mounted (or no elbow in 20cm )to make the air
discharged easily, the outlet pipe should not be used less than 90 degrees elbow (see figure 2).
4. Can't use the seawater or other heavy pollution with big grain impurity liquid as the liquid
medium .
Performance Curve:
Attentions:
1. Please add a fuse in the water pump power supply circuit to cut off the power supply when appearance the failure.
2. Avoid the water pump is covered or blocked and affected by the surrounding devices heating. The installation space is convenient for maintenance and replacement operation.
3. Working ambient temperature:-40℃--120℃, should try to avoid close to three-element catalytic, gas discharge pipe system and engine during the installation, ensure the working environment temperature
4. The installation position of the water pump should as much as possible close to the low water level , to extend the service life of the pump.
5. Pay attention to the purity of the water, avoid to jam and impeller-blocked to reduce the service life of pump
6.Please use the pump far from the dusty environment, the dust is harmful to reduce the service life
Mechanical Dimensions:
Applications:
1.The engine cooling circulation Pump
2.Motor control cooling cycle of 12m pure electric bus and hybrid bus
3. The New enery automotive cooling cycle
4. Heating vertilation air conditioning
5. Automotive engine cooling circulation
6.Truck motor control cooling cycle.
